High quality oils with exceptional antioxidant and demulsifying properties. Provide protection for bearings, circulating systems and other equipment that does not require the use of oil with extreme pressure properties.
Specifications: Shell Morlina S2 B oils meet Morgan Construction Company and Danieli lubricant requirements for bearings.
Low-viscosity mineral oils with a composition of additives (not containing zinc) for a wide range of applications in circulating lubricating systems, rolling and plain bearings, some hydraulic systems, high-speed spindles (ISO 5, ISO 10) and lightly loaded gears.
High performance oil for bearings and circulating systems. Excellent lubrication, high energy efficiency and a long service life even in the most severe conditions.
Specifications: [ISO 12925-1 type CKS, Alfa Laval group D (gearboxes), Aerzen Maschinenfabrik GmbH (fans), Baltimore Aircoli (gearboxes), Cincinnati Machine Various P applications, David Brown table H, Emerson (power transmission), GEA Westfalia Separator GmbH, Renold Gears (various equipment), Sharpe E-series (worm gears), Winsmith (Peerless-Winsmith Inc) (worm gears)].
Oils that meet the special requirements of pneumatic equipment. They are made on the basis of a mixture of deeply purified mineral components and a special additive composition providing an effective lubricating action and a high-strength oil film that meets the requirements of percussion drilling pneumatic tools / perforators / including those operating under especially severe conditions.
Specifications : [ISO 6743-11 types PAC и PBC].
Shell Corena S2 P are high quality air compressor oils designed to efficiently lubricate high pressure reciprocating compressors. Suitable for most reciprocating air compressors operating at elevated pressures and discharge temperatures up to 220 ° C.
Area of usage
Industrial reciprocating compressors operating at air discharge temperatures up to 220 ° C.
Compressors that supply breathing air and are equipped with additional cleaning devices that guarantee the suitability of the produced breathing air.
Compatibility and Miscibility
Seal compatibility: Shell Corena S2 P oils are compatible with all seal materials commonly found in air compressors.
For a complete list of endorsements and recommendations, please contact your local Shell representative.
Shell Corena S2 P are high quality air compressor oils designed to efficiently lubricate high pressure reciprocating compressors. Suitable for most reciprocating air compressors operating at elevated pressures and discharge temperatures up to 220 ° C.
Industrial reciprocating compressors operating at air discharge temperatures up to 220 ° C.
Compressors that supply breathing air and are equipped with additional cleaning devices that guarantee the suitability of the produced breathing air.
For a complete list of endorsements and recommendations, please contact your local Shell representative.
Mineral-based lubricants with a package of highly effective antioxidant, anti-corrosion, anti-wear and other additives, has good detergent properties. They are used for rotary air compressors with direct oil injection.
Specifications : [ISO 6743-3A DAH].
Top quality oils designed to lubricate rotary vane and screw air compressors. Contain a carefully selected additive composition. They have excellent demulsifying and anti-corrosion properties and thermo-oxidative stability.
Specifications: [ ISO 6743-3A DAJ].
Top quality oils designed to lubricate rotary vane and screw air compressors. Contain a carefully selected additive composition. They have excellent demulsifying and anti-corrosion properties and thermo-oxidative stability.
Specifications: [ ISO 6743-3A DAJ].
Synthetic oils of the highest quality based on esters with a composition of additives for any reciprocating air compressors, especially those operating at constantly high pressures (30 bar and above) and discharge temperatures (220 ° C). Can be used in machines that produce breathing air.
Specifications: [ISO 6743-3:2003 DAB (severe operating conditions), DIN 51506 VDL ISO/DP 6521-L-DAB (moderate operating conditions), EN 12021].
Synthetic oils of the highest quality based on esters with a composition of additives for any reciprocating air compressors, especially those operating at constantly high pressures (30 bar and above) and discharge temperatures (220 ° C). Can be used in machines that produce breathing air.
Specifications: [ISO 6743-3:2003 DAB (severe operating conditions), DIN 51506 VDL ISO/DP 6521-L-DAB (moderate operating conditions), EN 12021].
PAO-based top-quality synthetic oils for screw and vane air compressors. They contain a carefully selected composition of additives to ensure effective lubricating action and long (up to 12,000 hours) service life of oils in compressors operating in extreme temperature and operating conditions (over 100 ° C and 25 bar).
Specifications: [ISO 6743-3A DAJ, ABB VTR (HZTL 90617 list 3a)].
PAO-based top-quality synthetic oils for screw and vane air compressors. They contain a carefully selected composition of additives to ensure effective lubricating action and long (up to 12,000 hours) service life of oils in compressors operating in extreme temperature and operating conditions (over 100 ° C and 25 bar).
Specifications: [ISO 6743-3A DAJ, ABB VTR (HZTL 90617 list 3a)].
PAO-based top-quality synthetic oils for screw and vane air compressors. They contain a carefully selected composition of additives to ensure effective lubricating action and long (up to 12,000 hours) service life of oils in compressors operating in extreme temperature and operating conditions (over 100 ° C and 25 bar).
Specifications: [ISO 6743-3A DAJ, ABB VTR (HZTL 90617 list 3a)].
Synthetic oil based on polyalkylene glycol for compressors pumping hydrocarbon and other gases, including butadiene and vinyl chloride. It is used in lubricating systems and crankcases of compressors when they operate in a gas atmosphere.
Specifications: Burckhardt Compression A.G .: approved for use in K-type gas compressors, [Burckhardt Lubricating Oil (VSB) 1001301], approved by Linde A.G. for use with gases, including ammonia, vinyl chloride and butadiene.
Compressor oil SHELL Gas Compressor Oil S3 PSN 220 is the optimal material for lubricating pumping or compressing natural / associated gas installations, propane, humid air, gases, steam. Applicable in propane refrigeration compressors. Effectively lubricates and seals cylinders. Suitable for grease supplied by injection of lubricant. SHELL Gas Compressor Oil S3 PSN 220 is an ideal oil for running in compressor cylinders. The composition of the liquid determines its high performance and characteristics. SHELL Gas Compressor Oil S3 PSN 220 works at high and low temperatures, protects mechanism parts, is stable in operation, and increases the efficiency of equipment operation.
| Indicator | Test method | GasCompressor Oil S3 PSN 220 |
| Viscosity grade | ISO | |
| Kinematic viscosity at 40°C | ASTM D445 | 211 |
| Kinematic viscosity at 100°C | ASTM D445 | 17,9 |
| Flash point,°C | ASTM D92 | 268 |
| Density at 15°C, kg/m3 | ASTM D1298 | 888 |
Shell Refrigeration Oil S4 FR-V 68 (discontinued) is a synthetic refrigeration compressor oil based onalkylbenzene. This versatile offer meets the lubrication requirements of most refrigeration compressors and is compatible with all commonly used refrigerants, with the exception of HFCs.
Category: refrigeration oils
Description
Shell Refrigeration Oil S4 FR-V 68 (discontinued) is a synthetic alkylbenzene-based refrigeration compressor oil. This versatile offer meets the lubrication requirements of most refrigeration compressors and is compatible with all commonly used refrigerants, with the exception of HFCs.
Scope Shell Refrigeration Oil S4 FR-V 68
Refrigeration compressors. Shell Refrigeration Oil S4 FR-V 68 is recommended for use in open, semi-closed and hermetically sealed compressors used for cooling in home, commercial and industrial refrigeration units. Oil can be used in rotary and piston types of compressors.
Compatible with refrigerants. Shell Refrigeration Oil S4 FR-V is recommended for use with commonly used refrigerants:
Advantages of Shell Refrigeration Oil S4 FR-V 6
Health & Safety
Subject to the rules of personal and industrial hygiene, as well as its proper use in recommended applications, Shell Refrigeration Oil S4 FR-V poses no health or environmental hazard. More complete information on this issue is contained in the product safety data sheet.
Protect the environment
Waste oil must be sent to specialist waste disposal facilities. Do not discharge used oil into drains, soil, or water.
Typical physico-chemical characteristics Shell Refrigeration Oil S4 FR-V 68
| The name of indicators | Method | Meaning |
| ISO viscosity grade | ISO 3448 |
68 |
| Refrigeration Oil Group | DIN 51503 |
KAA, KC |
| Kinematic viscosity, mm
|
||
| At40°C | ISO 3104 |
68 |
| At100°C | 6,2 | |
| Density at 15 °С, kg/m | ISO 12185 |
871
|
| Flash point in open crucible, °С | DIN ISO 2592 |
180
|
| Pour temperature, °C
|
DIN ISO 3016 |
39 |
| Acid number, mgKOH/g | ASTM D 664 (TAN) |
0,04
|
| Flocculation temperature, °С | ||
| R290 | DIN 51351 |
<-50 |
| R22 | <-50 | |
| R12 | <-50 | |
| Refrigerant Stability (250°C), h | DIN 51593 |
>96 |
| R290 | >96 | |
| R22 | >96 | |
| R12 | ||
| Miscibility with R134a, °C | Miscibility over the entire temperature range of application. |
The name of indicators
DIN 51503 KAA and KC.
Bucket 20L, barrel 216,5 L
Polyglycol ester synthetic oil for systems using R 134a refrigerant and other types of HFC refrigerants.
Specifications: [DIN 51503 KD].
Mineral oil. Especially recommended for refrigeration compressors that use ammonia as a refrigerant. It can also be used in systems using hydrocarbons, such as propane (R290). Not recommended for use with refrigerants R12, R22 and R 134a.
Specifications : [DIN 51503 KAА/КЕ].
In our company you can buy Shell Diala S4 ZX-I both wholesale and retail. Our managers will help you choose the right products, answer related questions.
Shell Diala S4 ZX-I is a new electrical insulating oil designed to solve the problems encountered during the operation of the latest generation of power generators. Provides extended oil life and is sulfur free. Shell Diala S4 ZX-I is made on the basis of sulfur-free base oils obtained using GTL-technology (gas-to-liquid). Such base oils provide high stability of the resulting lubricant and have excellent antioxidant properties. In addition, Shell Diala S4 ZX-I oil does not contain polychlorinated biphenyls (PCB) and dibenzyl disulfides (DBDS). Shell Diala S4 ZX-I oil withstands both well-known and new industrial copper corrosion tests.
Area of application
This brand of transformer oil is designed to solve problems associated with the operation of the latest generation of power generators.
Tolerances
Shell Corena S2 P are high quality air compressor oils designed to efficiently lubricate high pressure reciprocating compressors. Suitable for most reciprocating air compressors operating at elevated pressures and discharge temperatures up to 220 ° C.
Industrial reciprocating compressors operating at air discharge temperatures up to 220 ° C.
Compressors that supply breathing air and are equipped with additional cleaning devices that guarantee the suitability of the produced breathing air.
For a complete list of endorsements and recommendations, please contact your local Shell representative.
Shell Turbo S4 GX 32 is based on base oils produced using Shell Gas-to-Liquid technology (gas-liquid conversion technology) and meets the needs of the latest high-performance turbines. Thanks to its highly efficient, long-term performance under the most severe conditions, Shell Turbo S4 GX 32 helps to reduce wear and tear, minimizes deposits and sludge formation even under cyclic peak loads
Packing: 209kg
Specifications : ASTM 4304-13 Type I, II & III, GB (China) 11120-2011, L-TSE, L-TGE and L-TGSE, DIN 51515 Part 1 L-TDP & Part 2 L-TGP, 51524-2-HLP, JIS K-2213 Type 2, ISO 8068, L-TGF и L-TGSE, approved Siemens Power Generation, TLV 9013 04 and TLV 9013 05, General Electric GEK 32568j, 46506e, 28143b, 101941a, 107395a and 120498, Alstom HTGD 90 117 V0001 Y, Dresser Rand 003-406-001 Type I and III, Westinghouse 21 TO591 and 55125Z3 and Eng Spec_DP21T-00000443, Solar ES 9-224Y Class II, MAN D&T SE TED 10000494596
Turbo_S4_GX_32_(TDS-rus)Download
Turbo_S4_GX_46_(TDS-rus)Download
GTL technology, Shell Turbo S4 X 32, is engineered to meet the latest requirements in high-performance turbines. Provides highly effective work for a long time under any operating conditions. Shell Turbo S4 X 32 oil reduces scale build-up even with cyclic peak loads.
Packing: 209kg
Specifications : ASTM 4304-13 Type I & III, GB (China) 11120-2011, L-TGA, L-TSA, L-TGSB, DIN 51515 Part 1 L-TD & Part 2 L-TG, ISO 8068, L-TGB и L-TGSB, Oil Shell Turbo S4 X 32 approved Siemens Power Generation by specifications TLV 9013 04 and TLV 9013 05, General Electric GEK 32568j, 46506e, 28143b, 107395a и 120498, Alstom HTGD 90 117 V0001 Y, Dresser Rand 003-406- 001 Type I & III, Westinghouse 21 TO591 and 55125Z3 and Eng Spec_DP21T-00000443, Solar ES 9-224Y Class II, MAN D&T SE TED 10000494596, Shell Turbo S4 X 32 meets the requirements Specifications Elliott Turbo-machinery X-18-0004, GE Oil and Gas — the relevant specification is reflected in the document ITN52220 .04, Shell Turbo S4 X 32 meets the requirements of MS04-MA-CL001 (Rev .4), MS04-MA-CL002 (Rev .4) MS04-MA-CL005 (Rev .2)
Turbo_S4_X_32_(TDS-rus)Download
Shell Turbo T is designed to meet the requirements of manufacturers of state-of-the-art steam turbine systems and light-loaded gas turbines that do not require high anti-wear properties in the oil. It is made on the basis of high-quality processed oils with a composition of zinc-free additives, which provides excellent oxidative stability, corrosion protection, low tendency to foaming and excellent demulsifying properties
Packing: 209 kg
Specifications : Siemens Power Generation TLV 9013 04 & TLV 9013 05 (ISO 32, 46), Alstom Power Turbo-Systems HTGD 90-117 (все), Man Turbo SP 079984 D0000 E99 (all), Fives Cincinnati, LLC (official Cincinnati Machine): P-38 (ISO 32), P-55 (ISO 46), P-54 (ISO 68), General Electric GEK 28143b, type I, GEK 32568j, GEK 46506e (ISO 32), General Electric GEK 28143b — type II (ISO 46), General Electric GEK 28143b — type III (ISO 68), Siemens — Westinghouse 21T0591 & PD-55125Z3, DIN 51515-1 TD и DIN 51515-2 TG (all), ISO 8068, L-TSA и L-TGA (all), L-THA (ISO68), Solar ES 9-224W, class II (ISO 32, 46), GEC Alsthom NBA P50001A (ISO 32, 46), JIS K 2213:2006 type 2 (all), ASTM D4304, type I (all) and all III (ISO 32, 46), GB 11120-2011, L-TSA и L-TGA (all), Indian Standard IS 1012:2002 (ISO 32), Skoda: Technical Properties Tp 0010P/97 (steam turbines) (ISO 32, 46), Alstom Power Hydro Generators (spec HTWT600050) (ISO 32, 46), Dresser Rand (spec 003-406-001) (ISO 32, 46), Siemens Turbo Compressors (spec 800 037 98) (all), GE Oil and Gas — the relevant specification is reflected in the document ITN52220.04. Andritz Hydro (ISO 46, 68), MAN D&T SE TED 10000494596 (ISO 46), GE Oil and Gas — the relevant specification is reflected in the document ITN52220.04 (ISO 46), ANSALDO TGO2-0171-E00000/B (ISO 46)
Turbo_T_32_(TDS-rus)Download
Turbo_T_46_(TDS-rus)Download
Turbo_T_68_(TDS-rus)Download
Oil with excellent antioxidant and anti-corrosion properties for steam (gearless) and gas turbines manufactured by Mitsubishi Heavy Industries
Packing: 209 kg
Specifications : MHI Turbine Oil, type 2 MS04-MA-CL001 (R-2) и MS04-MACL002 (R-2)
Turbo_J_32_(TDS-rus) Download
Synthetic oils based on polyglycols with very good low-temperature characteristics, thermal and oxidative stability and anti-friction properties. Designed for high-speed / high-loaded gearboxes, especially worm gears (steel-bronze steam), as well as circulating bearing lubrication systems (for example, paper machine calenders).
Not recommended for aluminum-containing bronze alloys.
Specifications: [David Brown S1.53.105 G, ISO 12925-1 type СКЕ, ANSI/AGMA 9005-EO2 (EP)], Flender AG, Bonfiglioli.
Synthetic industrial oils with exceptionally high performance. Used for the lubrication of bearings and closed gears under the most severe operating conditions and at high loads. Recommended for industrial gearboxes operating at constant high temperatures, and for some systems (gearboxes or bearings), designed for long intervals between oil changes or without oil change (“lifetime” lubrication).
Specifications: [ ISO 12925-1 CKD, DIN 51517-3 CLP HC, ANSI/AGMA 9005-ЕО2 (ЕР), US Steel 224, David Brown S1.53.106], Flender AG, approved for wind turbine gearboxes: Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries, Sinovel.
Mineral oils for heavily loaded gears, bearings. The additive composition provides high anti-seize and anti-corrosion properties. Maintain high bearing capacity in steel gears. Oils can be used in oil mist lubrication systems.
2022
