admin – Page 2 – Global Trade Сo

Global Trade Сo > Статьи по: admin

Shell Corena S2 P 100

Shell Corena S2 P are high quality air compressor oils designed to efficiently lubricate high pressure reciprocating compressors. Suitable for most reciprocating air compressors operating at elevated pressures and discharge temperatures up to 220 ° C.

Area of usage

Piston air compressors

Industrial reciprocating compressors operating at air discharge temperatures up to 220 ° C.

Compressors that supply breathing air

Compressors that supply breathing air and are equipped with additional cleaning devices that guarantee the suitability of the produced breathing air.

Specifications, approvals and recommendations

DIN 51506 VBL
ISO 6743-3A-L DAA normal conditions

For a complete list of endorsements and recommendations, please contact your local Shell representative.

TURBO S4 GX 32 / 46

Shell Turbo S4 GX 32 is based on base oils produced using Shell Gas-to-Liquid technology (gas-liquid conversion technology) and meets the needs of the latest high-performance turbines. Thanks to its highly efficient, long-term performance under the most severe conditions, Shell Turbo S4 GX 32 helps to reduce wear and tear, minimizes deposits and sludge formation even under cyclic peak loads

Packing: 209kg

Specifications : ASTM 4304-13 Type I, II & III, GB (China) 11120-2011, L-TSE, L-TGE and L-TGSE, DIN 51515 Part 1 L-TDP & Part 2 L-TGP, 51524-2-HLP, JIS K-2213 Type 2, ISO 8068, L-TGF и L-TGSE, approved Siemens Power Generation, TLV 9013 04 and TLV 9013 05, General Electric GEK 32568j, 46506e, 28143b, 101941a, 107395a and 120498, Alstom HTGD 90 117 V0001 Y, Dresser Rand 003-406-001 Type I and III, Westinghouse 21 TO591 and 55125Z3 and Eng Spec_DP21T-00000443, Solar ES 9-224Y Class II, MAN D&T SE TED 10000494596

Turbo_S4_GX_32_(TDS-rus)Download

Turbo_S4_GX_46_(TDS-rus)Download

SHELL TURBO S4 X 32

GTL technology, Shell Turbo S4 X 32, is engineered to meet the latest requirements in high-performance turbines. Provides highly effective work for a long time under any operating conditions. Shell Turbo S4 X 32 oil reduces scale build-up even with cyclic peak loads.

Packing: 209kg

Specifications : ASTM 4304-13 Type I & III, GB (China) 11120-2011, L-TGA, L-TSA, L-TGSB, DIN 51515 Part 1 L-TD & Part 2 L-TG, ISO 8068, L-TGB и L-TGSB, Oil Shell Turbo S4 X 32 approved Siemens Power Generation by specifications TLV 9013 04 and TLV 9013 05, General Electric GEK 32568j, 46506e, 28143b, 107395a и 120498, Alstom HTGD 90 117 V0001 Y, Dresser Rand 003-406- 001 Type I & III, Westinghouse 21 TO591 and 55125Z3 and Eng Spec_DP21T-00000443, Solar ES 9-224Y Class II, MAN D&T SE TED 10000494596, Shell Turbo S4 X 32 meets the requirements Specifications Elliott Turbo-machinery X-18-0004, GE Oil and Gas — the relevant specification is reflected in the document ITN52220 .04, Shell Turbo S4 X 32 meets the requirements of MS04-MA-CL001 (Rev .4), MS04-MA-CL002 (Rev .4) MS04-MA-CL005 (Rev .2)

Turbo_S4_X_32_(TDS-rus)Download

Shell Turbo T 32 / 46 / 68

Shell Turbo T is designed to meet the requirements of manufacturers of state-of-the-art steam turbine systems and light-loaded gas turbines that do not require high anti-wear properties in the oil. It is made on the basis of high-quality processed oils with a composition of zinc-free additives, which provides excellent oxidative stability, corrosion protection, low tendency to foaming and excellent demulsifying properties

Packing: 209 kg

Specifications : Siemens Power Generation TLV 9013 04 & TLV 9013 05 (ISO 32, 46), Alstom Power Turbo-Systems HTGD 90-117 (все), Man Turbo SP 079984 D0000 E99 (all), Fives Cincinnati, LLC (official Cincinnati Machine): P-38 (ISO 32), P-55 (ISO 46), P-54 (ISO 68), General Electric GEK 28143b, type I, GEK 32568j, GEK 46506e (ISO 32), General Electric GEK 28143b — type II (ISO 46), General Electric GEK 28143b — type III (ISO 68), Siemens — Westinghouse 21T0591 & PD-55125Z3, DIN 51515-1 TD и DIN 51515-2 TG (all), ISO 8068, L-TSA и L-TGA (all), L-THA (ISO68), Solar ES 9-224W, class II (ISO 32, 46), GEC Alsthom NBA P50001A (ISO 32, 46), JIS K 2213:2006 type 2 (all), ASTM D4304, type I (all) and all III (ISO 32, 46), GB 11120-2011, L-TSA и L-TGA (all), Indian Standard IS 1012:2002 (ISO 32), Skoda: Technical Properties Tp 0010P/97 (steam turbines) (ISO 32, 46), Alstom Power Hydro Generators (spec HTWT600050) (ISO 32, 46), Dresser Rand (spec 003-406-001) (ISO 32, 46), Siemens Turbo Compressors (spec 800 037 98) (all), GE Oil and Gas — the relevant specification is reflected in the document ITN52220.04. Andritz Hydro (ISO 46, 68), MAN D&T SE TED 10000494596 (ISO 46), GE Oil and Gas — the relevant specification is reflected in the document ITN52220.04 (ISO 46), ANSALDO TGO2-0171-E00000/B (ISO 46)

Turbo_T_32_(TDS-rus)Download

Turbo_T_46_(TDS-rus)Download

Turbo_T_68_(TDS-rus)Download

Shell Turbo J 32

Oil with excellent antioxidant and anti-corrosion properties for steam (gearless) and gas turbines manufactured by Mitsubishi Heavy Industries

Packing: 209 kg

Specifications : MHI Turbine Oil, type 2 MS04-MA-CL001 (R-2) и MS04-MACL002 (R-2)

Turbo_J_32_(TDS-rus) Download

Shell Omala S4 WE

Synthetic oils based on polyglycols with very good low-temperature characteristics, thermal and oxidative stability and anti-friction properties. Designed for high-speed / high-loaded gearboxes, especially worm gears (steel-bronze steam), as well as circulating bearing lubrication systems (for example, paper machine calenders).

Not recommended for aluminum-containing bronze alloys.

Specifications: [David Brown S1.53.105 G, ISO 12925-1 type СКЕ, ANSI/AGMA 9005-EO2 (EP)], Flender AG, Bonfiglioli.

Shell Omala S4 GX

Synthetic industrial oils with exceptionally high performance. Used for the lubrication of bearings and closed gears under the most severe operating conditions and at high loads. Recommended for industrial gearboxes operating at constant high temperatures, and for some systems (gearboxes or bearings), designed for long intervals between oil changes or without oil change (“lifetime” lubrication).

Specifications: [ ISO 12925-1 CKD, DIN 51517-3 CLP HC, ANSI/AGMA 9005-ЕО2 (ЕР), US Steel 224, David Brown S1.53.106], Flender AG, approved for wind turbine gearboxes: Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries, Sinovel.

Shell Omala S2 G

Mineral oils for heavily loaded gears, bearings. The additive composition provides high anti-seize and anti-corrosion properties. Maintain high bearing capacity in steel gears. Oils can be used in oil mist lubrication systems.

Shell Omala S1 W 460

Refined, highly viscous mineral oil, compounded with a small amount of fatty oils. It is mainly used for lubrication of steam engine cylinders operating at high temperatures and pressures, when low carbonization and “steaming” are important factors.

Specifications : AGMA 9005-EO2 (CP).

Shell Omala

High quality industrial gear and bearing oils

Shell Omala is a high-quality, lead-free, high-pressure, anti-seize oil designed to lubricate heavy duty industrial gears. High bearing capacity and antifriction characteristics allow the successful use of these oils in gears and other applications.

Area of usage

Shell Omala oils, developed on the basis of highly refined base oils with a high viscosity index and compositions of special sulfur-phosphorus additives to impart extreme pressure properties, can be successfully used in the following areas:

Steel Gear Transmissions
Industrial gears requiring anti-seize oils
Bearings
Circulation and spray lubrication systems

Shell Omala oils cannot be used in automotive hypoid gears. They recommend the use of Shell Spirax family oils.

Advantages

Excellent oxidation and heat resistance

Resist thermal stress, deposits and other harmful oxidation products. Long service life, even at oil temperatures up to 100 ° C in some applications.

Effective Corrosion Inhibitors

Protect both steel and bronze parts, even in the presence of water and particulate matter.

Lead free

Less hazardous to personnel health and disposal.

Wide viscosity range

Oils for the most diverse and most critical nodes.

Demulsifying properties

Shell Omala oils exhibit high demulsifying properties, so water can be easily removed from the lubrication system. (Water can significantly increase the surface fatigue of gears and bearings, as well as cause corrosion on the internal surfaces of parts. This is why water should not be allowed to enter the oil or should be removed immediately from the system).

Excellent load bearing capacity

Reduced wear of teeth and bearings, steel and bronze. Laboratory tests show that the load-bearing capacity of Shell Omala oils is significantly higher than that of gear oils containing lead. Tooth wear is significantly reduced, in particular at high loads. Typical Results for Shell Omala 220:

Extreme pressure properties

Timken Lubricant Testing Facility

materials and wear

permissible load, pounds

(ASTM-D2782)

Not lower than 60

Four ball friction machine,

seizing load, kg

(ASTM D 2783)

250

Bearing capacity in the FZG test,

Withstands loading steps

FZG A/8.3/90

FZG A/16,6/90

>12

Specifications and approvals

Meets the requirements ISO 12925-1 type CKC.

Meets the requirements David Brown S1.53.101.

Recommendations

Recommendations for the use of lubricants in areas not listed in this leaflet may be obtained from your Shell representative.

Health & Safety

Subject to good personal and industrial hygiene practices and proper use in recommended applications, Shell Omala is not a hazard to health and the environment.

More complete information on this issue is contained in the product safety data sheet.

Protect the environment

Used oils must be sent to specialized waste disposal facilities. Do not discharge used oils into drains, soil, or water.

Indicator	Method	Shell Omala
ISO viscosity grade	ISO 3448	68	100	150	220	320	460	680	800
Kinematic viscosity, mm/s at 40°C at 100°C	ISO 3104	68 8,7	100 11,4	150 15,0	220 19,4	320 25,0	460 30,8	680 38,0	800 39,0
Viscosity index	ISO 2909	99	100	100	100	100	97	92	92
Density at 15°C, kg/m	ISO 12185	887	891	897	899	903	904	912	930
Flash point in open crucible, °C	ISO 2592	190	195	195	200	205	205	205	215
Sour temperature, °C	ISO 3016	-24	-24	-24	-18	-15	-12	-9	-6

The values of the given physico-chemical indicators are typical for currently manufactured products. Subsequently, they are subject to change in accordance with Shell specifications.

Shell Gadus S4 OGXK 00/000

New generation Shell Gadus S4 OGXK 00/000 low-temperature grease with extreme pressure properties for open gears and steel ropes of mining equipment operating in conditions of extremely low temperatures and high impact loads. It is a balanced composition based on mineral oil and carefully selected additives, including fillers (5% MoS2 and others), which provide high bearing capacity, low friction coefficient, high adhesion to metal, water resistance and corrosion resistance. Recommended for use in centralized lubrication systems.

Specifications : Bucyrus SD 4713, P&H 520 Ver 00, 03-97, CAT Service Advisory SA 11-005 SD 4713.

The grease is optimized for use at ambient temperatures from -44 ° C to + 10 ° C.

Shell Gadus S4 OG Multi-Season

Shell Gadus S4 OG Multi-Season 0/00 Advanced Grease for ropes and open gears. Shell Gadus S4 OG Multi-Season Grease is primarily designed for use in mining equipment assemblies, buckets, draglines and mining excavators operating under high loads and low ambient temperatures. Shell Gadus S4 OG Multi-Season is formulated with a comprehensive aluminum soap, high-quality, high-viscosity mineral base oil and improved anti-seize and anti-wear additives. The liquid structure of the lubricant provides pumpability at low temperatures.

Specifications: Bucyrus SD 4713, P&H 520 Ver 09, 04-93, CAT Service Advisory SA 11-005 SD 4713.

The grease is optimized for use at ambient temperatures from -20 ° C to + 40 ° C.

Shell Gadus S4 OGT 0

New generation Shell Gadus S4 OGT 0 high-temperature grease with extreme pressure properties for open gears and steel ropes of mining equipment operating in conditions of extremely high temperatures and high impact loads. It is a unique balanced composition based on mineral oil and carefully selected additives, including fillers (5% MoS2 and others), which provide high bearing capacity, low friction coefficient, high adhesion to metal, water resistance and corrosion resistance. Long-lasting protection is provided thanks to improved polymer technology, which forms a sticky and water-resistant lubricant film. Recommended for use in centralized lubrication systems.

Specifications: FLSmidth Group, Metso Minerals et al. Approved by Bucyrus SD 4713, P&H 520 Ver 00, 03-97, 464 Ver 09, 04- 93, CAT Service Advisory SA 11-005 SD 4713.

The grease is optimized for use at ambient temperatures from 0 ° C to + 50 ° C.

Shell Gadus S3 Repair

High-quality aluminum – a comprehensive running-in spray lubricant based on a mixture of semi-synthetic base oils and containing finely divided graphite as a solid lubricant. The chemical composition of the product is designed for a controlled process of running-in and reducing surface roughness of parts, both new and damaged open gears.

Scope: equipment for mining, cement, steel production, where open gears are used:

Crushers, mill
Rotary kilns

Operating temperature range:

When spraying using an automatic system: from -15 ° C to 100 ° C.

After application, the grease is operational: -30 ° C to 200 ° C

Shell Tellus S2 M

The new generation of Shell Tellus S2 M (32/46/68), the most famous hydraulic oil, for power monitoring and transmission systems of various industrial equipment. The patented additive composition gives the highly refined mineral base an additional high oxidative, thermal and hydrolytic stability, guarantees excellent filterability, as well as anti-wear and protective properties.

Specifications and approvals:

DENISON Hydraulics HF-0, HF-1, HF-2,
Cincinnati Machine P-68 (ISO 32), P-70 (ISO 46), P-69 (ISO 68),
Eaton Vickers (Brochure 694),
ISO11158 HM,
AFNOR NF-E 48-603,
ASTM 6158- 05 (HM),
DIN51524, part 2, type HLP,
Sweden Standard SS 15 54 34 AM,
GB 111181- 1-94 (HM),
Bosh Rexroth Ref 17421- 001, RD 220-1/04.03

* The antiwear additive in Shell Tellus S2 M oils is zinc dithiophosphate, which limits the possibility of their use in systems where silver parts are used. Shell Tellus S3 M or Shell Morlina S2 B oils are recommended for them.

Shell Tellus S3 M

Shell Tellus S3 M Hydraulic Fluids (32/46/68/100) – Lubricants developed using unique zinc-free technology that provide superior protection and high performance for most industrial equipment. Shell Tellus S3 M fluids resist decomposition due to high temperatures and mechanical stresses, helping to prevent the formation of deposits that reduce the effectiveness of hydraulic systems.

Specifications and approvals:

Denison HF-0, HF-1, HF-2,
Eaton Vickers (Brochure 694),
MAG (Cincinnati Machine) P-68 (ISO 32), 69 (ISO 68), 70 (ISO 46),
DIN 51524-2 HLP,
ISO 11158 HM,
ASTM 6158 HM,
SS 15 54 34 M

Shell Tellus S4 ME

Shell Tellus S4 ME hydraulic oil is designed to increase the performance of hydraulic systems without compromising their protection and without affecting maintenance and operation. Shell Tellus S4 ME’s energy efficiency has been demonstrated on various equipment, such as injection molding machines, metal stamping equipment and conveyors in the mining industry. Shell Tellus S4 ME is formulated to protect equipment during operation and reduce maintenance costs due to its high level of wear protection and long oil life.

Specifications and approvals:

Denison Hydraulics HF-0, HF-1, HF-2,
Fives Cincinnati P-68 (ISO 32)
Eaton Vickers (brochure 694),
Bosch Rexroth RD 90220-01 (2011), ISO 32-68
Arburg (injection molding machines)
ASTM D6158(HM fluids)
ISO 11158 (HM fluids)
DIN 51524 Part 2 HLP
SS 15 54 34 M
Krauss Maffei

Shell Naturelle Fluid HF-E 46

Shell Naturelle HF-E is latest biodegradable flame-retardant hydraulic fluid of the HFDU type, designed for hydraulic systems and hydrostatic transmissions. It is completely biodegradable and has low ecotoxicity, which is why it is especially suitable for use in ecologically protected areas, as well as in industrial equipment operating in places of increased fire hazard, for example, at coal mines, metallurgical and foundries. A blend of fully synthetic esters and ashless additives provides Shell Naturelle HF-E with an excellent balance of lubricity and environmental compatibility.

Specifications and approvals:

European Union environmental label for lubricants Ecolabel licence UK/27/004,
Swedish Standard SS 15 54 34, SP,
ISO 15380 HEES,
ISO 12922 HFDU,
Approved Factory Mutual,
United States Environmental Protection Agency’s (EPA) 2013 Vessel General Permit (VGP),
VDMA 24568 (Synthetic esters),
Dutch MIA/VAMIL Milieulijst,
Deutch Positivliste Bioschmierstoffe,
Program USDA Bio-preferred,
Sperry Marine,
Quantum Marine Engineering,
Rolls Royce Marine

Shell Tellus S2 VA

Multigrade (IV 185) hydraulic oil with improved detergency. Designed primarily for mobile machinery operating in difficult conditions, with increased risk of pollution (for example, construction equipment), especially at low starting and high operating temperatures

Specifications and approvals:

DIN 51524-3 HVLPD,
ISO 11158 HV,
ASTM 6158-05 HV

Shell Tellus S2 V

Shell Tellus S2 V high performance oils (15/22/32/46/68/100) for mobile hydraulic systems with stable viscosity over a wide temperature range and under heavy mechanical loads. Recommended for use at low temperatures or when the air temperature varies widely.

Specifications and approvals:

DENISON Hydraulics HF-0, HF-1, HF-2 (ISO 32, 46, 68),
Cincinnati Machine P-68 (ISO 32), P-70 (ISO 46), P-69 (ISO 68),
Eaton Vickers 694 (ISO 22, 32, 46, 68),
SS 155434 AM (ISO 32, 46, 68),
ISO 11158 HV,
AFNOR NF-E 48-603,
ASTM 6158-05 HV,
DIN 51524-3 HVLP,
GB 111181-1-94 HV

Shell Tellus S3 V

A new generation of all-season (viscosity index 160) ash-free (zinc-free) extra-class oils for equipment operating under conditions where the ambient temperature can vary widely or when a minimum change in oil viscosity is required. They have excellent antiwear and antioxidant properties.

Specifications and approvals:

Denison Hydraulics (HF-0, HF-1 и HF-2),
Eaton Vickers 694,
Fives Cincinnati P-68 (ISO 32), P 70 (ISO 46), P 69 (ISO 68),
Bosch Rexroth (mineral hydraulic fluids for axial plunger hydraulic pumps RE 90220-01/09.09),
ISO 11158 (fluids HV),
DIN 51524-3 (oils HVLP),
ASTM 6158 (mineral oils HV),
SS 15 54 34 AV (ISO 46 и 68),
SS 15 54 34 AM (ISO 32)

Scope: construction equipment, tractors, dump trucks

Packing: 209 L

Shell Tellus S4 VX 32

Highly effective ashless (zinc free) new generation multigrade oil (IV> 300). Designed specifically for hydraulic systems and drives of mobile equipment, starting temperatures of which can be below -40 ° C (conditions of the Far North)

Specifications and approvals:

Komatsu Mining (work in cold and arctic conditions -50 — +35 °C),
Frigoscandia,
Dietz Automation GmbH

Shell Hydraulic S1 M

Shell Hydraulic S1 M (32/46) is a high-quality anti-wear hydraulic fluid that provides effective and reliable protection and operation of units in industrial units and mobile equipment

Specifications and approvals:

ISO 11158 (liquids HM),
DIN 51524, part 2, type HLP

Tellus S2 MA

Tellus S2 MA hydraulic oils with improved detergency for harsh environments and systems operating at high risk of contamination (such as metal cutting machines). Contain a multifunctional additive package. They have excellent dispersing, protective and demulsifying properties.

Specifications and approvals:

ISO 11158 HM,
ASTM 6158-05 HM,
Arburg,
Bosch Rexroth,
Mueller Weingarten

Shell Rimula R4 Multi 10W-30

High-performance Shell Rimula R4 MULTI 10W-30 oil providing triple protection of diesel engines (including turbo) for heavy, off-road and agricultural machinery, freight vehicles: low wear to increase engine life, reduced deposits to maintain its excellent performance and stability to damage from overheating

The main advantage:

Universality of application

Specifications

API CI-4, CH-4, CG-4, CF
Caterpillar ECF-1A, ECF-2
Cummins CES 20078/76/75/72/71
Mack EO-M Plus/ EO-M
JASO DH-1
CNH MAT 3520

Area of usage:

Freight transport, buses, agricultural and construction equipment.

Shell Rimula R4 L 15W-40

Extra-class Shell Rimula R4 L oil, specially developed to meet the requirements of the latest most environmentally friendly diesel engines (Euro 4, 5 and US 2007) used in trucking and off-road vehicles, including working on fuels with a high sulfur content.

Main advantage

Deposits and wear protection, particulate filter protection

Specifications

API CK-4, CJ-4, CI-4 Plus, CI-4, CH-4, SN
ACEA E9, E7
Caterpillar ECF-3/2
Cummins CES 20081/77/72/71
DDC 93K218
Deutz DQC III-10 LA
IVECO T2 E7
Mack EO-O Premium Plus
MAN M3575
MB 228.31
MTUtype 2.1
Renault Trucks RLD-3
Volvo VDS-4/3
JASO DH-2
Scania Low Ash
Allison TES-439

Shell Rimula R4 X 15W-40

Shell Rimula R4 X is specially formulated for Euro 5, 4, 3, 2 and US 2002 diesel engines. It contains a high-quality additive package to provide protection in the following critical areas: acid neutralization, wear control and scale control.

Main advantage

Universality of application

Specifications

API CI-4, CH-4, CG-4, CF-4, CF, SL
ACEA E7, E5, E3
Global DHD-1
CaterpillarECF-2, ECF 1-А
Cummins CES 20078/77/76/72/71
DDC 93K215
Mack EO-M, EO-M+
MAN M3275-1
MB 228.3
Deutz DQC III-10
Volvo VDS-3
JASO DH-1
MTU type 2

Area of usage

Freight transport, buses, special equipment

Shell Rimula R5 LM 10W-40

Semi-synthetic engine oil Shell Rimula R5 LM 10W-40 with high performance and long service life, developed using synthetic technologies.

Key benefits:

Extended drain intervals
Energy saving, fuel saving
Deposits and wear protection, particulate filter protection

Specifications :

API CI-4
ACEA E6
MAN M 3477, 3271-1
MB 228.51
Renault RLD-2
Volvo VDS-3

Area of usage:

Freight and passenger transport, special equipment

Shell Rimula R5 LM was created to provide protection for modern high-performance European-made diesel engines with diesel particulate filters and catalytic converters that meet the environmental standards of Euro 4 and 5.