Shell Tellus

The new generation of Shell Tellus S2 M (32/46/68), the most famous hydraulic oil, for power monitoring and transmission systems of various industrial equipment. The patented additive composition gives the highly refined mineral base an additional high oxidative, thermal and hydrolytic stability, guarantees excellent filterability, as well as anti-wear and protective properties.

Specifications and approvals:

• DENISON Hydraulics HF-0, HF-1, HF-2,
• Cincinnati Machine P-68 (ISO 32), P-70 (ISO 46), P-69 (ISO 68),
• Eaton Vickers (Brochure 694),
• ISO11158 HM,
• AFNOR NF-E 48-603,
• ASTM 6158- 05 (HM),
• DIN51524, part 2, type HLP,
• Sweden Standard SS 15 54 34 AM,
• GB 111181- 1-94 (HM),
• Bosh Rexroth Ref 17421- 001, RD 220-1/04.03

* The antiwear additive in Shell Tellus S2 M oils is zinc dithiophosphate, which limits the possibility of their use in systems where silver parts are used. Shell Tellus S3 M or Shell Morlina S2 B oils are recommended for them.

Shell Tellus S3 M Hydraulic Fluids (32/46/68/100) – Lubricants developed using unique zinc-free technology that provide superior protection and high performance for most industrial equipment. Shell Tellus S3 M fluids resist decomposition due to high temperatures and mechanical stresses, helping to prevent the formation of deposits that reduce the effectiveness of hydraulic systems.

Specifications and approvals:

• Denison HF-0, HF-1, HF-2,
• Eaton Vickers (Brochure 694),
• MAG (Cincinnati Machine) P-68 (ISO 32), 69 (ISO 68), 70 (ISO 46),
• DIN 51524-2 HLP,
• ISO 11158 HM,
• ASTM 6158 HM,
• SS 15 54 34 M

Shell Tellus S4 ME hydraulic oil is designed to increase the performance of hydraulic systems without compromising their protection and without affecting maintenance and operation. Shell Tellus S4 ME’s energy efficiency has been demonstrated on various equipment, such as injection molding machines, metal stamping equipment and conveyors in the mining industry. Shell Tellus S4 ME is formulated to protect equipment during operation and reduce maintenance costs due to its high level of wear protection and long oil life.

Specifications and approvals:

• Denison Hydraulics HF-0, HF-1, HF-2,
• Fives Cincinnati P-68 (ISO 32)
• Eaton Vickers (brochure 694),
• Bosch Rexroth RD 90220-01 (2011), ISO 32-68
• Arburg (injection molding machines)
• ASTM D6158(HM fluids)
• ISO 11158 (HM fluids)
• DIN 51524 Part 2 HLP
• SS 15 54 34 M
• Krauss Maffei

Shell Naturelle HF-E is latest biodegradable flame-retardant hydraulic fluid of the HFDU type, designed for hydraulic systems and hydrostatic transmissions. It is completely biodegradable and has low ecotoxicity, which is why it is especially suitable for use in ecologically protected areas, as well as in industrial equipment operating in places of increased fire hazard, for example, at coal mines, metallurgical and foundries. A blend of fully synthetic esters and ashless additives provides Shell Naturelle HF-E with an excellent balance of lubricity and environmental compatibility.

Specifications and approvals:

• European Union environmental label for lubricants Ecolabel licence UK/27/004,
• Swedish Standard SS 15 54 34, SP,
• ISO 15380 HEES,
• ISO 12922 HFDU,
• Approved Factory Mutual,
• United States Environmental Protection Agency’s (EPA) 2013 Vessel General           Permit (VGP),
• VDMA 24568 (Synthetic esters),
• Dutch MIA/VAMIL Milieulijst,
• Deutch Positivliste Bioschmierstoffe,
• Program USDA Bio-preferred,
• Sperry Marine,
• Quantum Marine Engineering,
• Rolls Royce Marine

Multigrade (IV 185) hydraulic oil with improved detergency. Designed primarily for mobile machinery operating in difficult conditions, with increased risk of pollution (for example, construction equipment), especially at low starting and high operating temperatures

Specifications and approvals:

• DIN 51524-3 HVLPD,
• ISO 11158 HV,
• ASTM 6158-05 HV

Shell Tellus S2 V high performance oils (15/22/32/46/68/100) for mobile hydraulic systems with stable viscosity over a wide temperature range and under heavy mechanical loads. Recommended for use at low temperatures or when the air temperature varies widely.

Specifications and approvals:

• DENISON Hydraulics HF-0, HF-1, HF-2 (ISO 32, 46, 68),
• Cincinnati Machine P-68 (ISO 32), P-70 (ISO 46), P-69 (ISO 68),
• Eaton Vickers 694 (ISO 22, 32, 46, 68),
• SS 155434 AM (ISO 32, 46, 68),
• ISO 11158 HV,
• AFNOR NF-E 48-603,
• ASTM 6158-05 HV,
• DIN 51524-3 HVLP,
• GB 111181-1-94 HV

A new generation of all-season (viscosity index 160) ash-free (zinc-free) extra-class oils for equipment operating under conditions where the ambient temperature can vary widely or when a minimum change in oil viscosity is required. They have excellent antiwear and antioxidant properties.

Specifications and approvals:

• Denison Hydraulics (HF-0, HF-1 и HF-2),
• Eaton Vickers 694,
• Fives Cincinnati P-68 (ISO 32), P 70 (ISO 46), P 69 (ISO 68),
• Bosch Rexroth (mineral hydraulic fluids for axial plunger hydraulic pumps RE 90220-01/09.09),
• ISO 11158 (fluids HV),
• DIN 51524-3 (oils HVLP),
• ASTM 6158 (mineral oils HV),
• SS 15 54 34 AV (ISO 46 и 68),
• SS 15 54 34 AM (ISO 32)

Scope: construction equipment, tractors, dump trucks

• Technical description Oils Shell Tellus S3 V 32
• Technical description Oils Shell Tellus S3 V 46
• Technical description Oils Shell Tellus S3 V 68

Packing: 209 L

Highly effective ashless (zinc free) new generation multigrade oil (IV> 300). Designed specifically for hydraulic systems and drives of mobile equipment, starting temperatures of which can be below -40 ° C (conditions of the Far North)

Specifications and approvals:

• Komatsu Mining (work in cold and arctic conditions -50 — +35 °C),
• Frigoscandia,
• Dietz Automation GmbH

Shell Hydraulic S1 M (32/46) is a high-quality anti-wear hydraulic fluid that provides effective and reliable protection and operation of units in industrial units and mobile equipment

Specifications and approvals:

• ISO 11158 (liquids HM),
• DIN 51524, part 2, type HLP

Tellus S2 MA hydraulic oils with improved detergency for harsh environments and systems operating at high risk of contamination (such as metal cutting machines). Contain a multifunctional additive package. They have excellent dispersing, protective and demulsifying properties.

Specifications and approvals:

• ISO 11158 HM,
• ASTM 6158-05 HM,
• Arburg,
• Bosch Rexroth,
• Mueller Weingarten