Shell Spirax S5 ATE 75W-90 is specially designed to meet the stringent requirements for lubricating highly loaded transmissions of passenger cars.
Application Range Spirax S5 ATE 75W-90
- “Transaxle” transmissions
Transaxle-type transmissions heavily loaded with a single product lubricated with a combined gearbox and drive axle with a hypoid final drive, in particular sports cars.
- Car transmissions
Highly loaded final drives, synchronized and unsynchronized gearboxes.
Performance, features and benefits
- Superior gear and synchronizer protection
Carefully selected base oils in combination with the latest additive package allow you to achieve the highest level of operational properties of drive axles, where both gear protection and compatibility with synchronizers are required.
- Extended transmission life
High resistance to shear loads and extreme pressure additives provide excellent protection of mechanisms from wear and pitting, prevent premature breakdowns and increase the service life of transmission and oil units. Excellent oxidative and thermal stability also helps protect seals from damage due to scale formation.
- Increased transmission efficiency
Reduces friction losses, thereby improving the efficiency of transmission units. Since Shell Spirax S5 ATE 75W-90 is a transmission oil based on synthetic technology, it provides optimal lubrication at both high and low temperatures.
- Has no negative impact on the environment
Excellent seal compatibility ensures leakage protection. Low chlorine formulations and the possibility of extending the oil change interval guarantee reduced environmental impact.
- Recognized and used by leading sports car manufacturers
Advantages Shell Spirax S5 ATE 75W-90 is recognized by many leading manufacturers of sports cars using this product as the first fill and service oil.
- Part of Shell’s range of synthetic products
Use in combination with other Shell synthetic products for maximum benefits.
Specifications, Approvals and Recommendations Shell Spirax S5 ATE 75W-90:
- Ferrari
- Getrag
- MB 236.26
- API Service Specification : GL-4, GL-5, MT-1
For a complete list of endorsements and recommendations, please contact your local Shell representative.
Typical physico-chemical characteristics
| The properties | Method | Shell Spirax S5 ATE 75W-90 |
| SAE viscosity class | SAE J 306 | 75W-90 |
| Kinematic viscosity at 40°Cмм2/с | ISO 3104 | 81 |
| Kinematic Viscosity at 100°C мм2/с | ISO 3104 | 14.9 |
| Viscosity index | ISO 2909 | 194 |
| Dynamic viscosity mPa*s | ISO 9262 | 35000 |
| Density at 15°C kg/m3 | ISO 12185 | 879 |
| Flash point in open crucible °C
|
ISO 2592 | 205
|
| Pour point °C | ISO3016 | -45 |
The values of the given physico-chemical indicators are typical for currently manufactured products. Subsequently, they are subject to change in accordance with Shell specifications.
Health, Safety and the Environment
Subject to the rules of personal and industrial hygiene, as well as its proper use in the recommended Area of usages, Shell Spirax S5 ATE 75W-90 does not pose a health or environmental hazard.
Avoid contact with skin. When working with used oil, wear protective gloves / gloves. If oil gets on your skin, immediately wash it off with soap and water. More complete information on this issue is contained in the product safety data sheet, which can be obtained from a Shell representative.
Waste oil must be sent to specialist waste disposal facilities. Do not discharge used oil into drains, soil, or water.
